User manual

o You should select a control knob position that is suitable for the
particular cooking that you are carrying out. See the table on the
next page for guidance on the most appropriate control knob
position.
o When you have finished cooking on a particular zone, it is
important to make sure that the control knob is turned back
to 0 (the off position).
o The warning light on the control panel will inform you if a
cooking area is turned on or off.
o The residual heat indicator will remain lit until the
temperature of the cooking area has fallen below 60°C.
Using the dual zone on the ceramic hob
o The central and front left zones on your hob top are dual
zones.
o To activate the first area of a dual zone, you should rotate the
control knob between 1 – 11 and select the heat setting of
your choice.
o To activate the second area of a dual zone as well, you should
rotate the knob past 11 and then turn it back to the heat
setting of your choice.
o To return to only one area operating, return the control knob
to zero and then turn it back to your desired heat setting.
o IMPORTANT: When using a dual zone, it is important
that the control knob is only turned clockwise.
23