User manual

Electrical connection

YOUR COOKER HOOD IS INTENDED FOR FITTED AND

PERMANENT INSTALLATION.

o The cooker hood’s power cable must be fitted upstream from the

electrical connection, using an omni-polar switch with a contact

distance of at least 3 mm. THE FUSE MUST BE RATED AT 3

AMPS.

WARNING: THIS APPLIANCE MUST BE EARTHED. It

should only be connected by a competent person, using

fixed wiring via a double pole switched fused spur outlet.

(UK ONLY).

We recommend that the appliance is connected by a qualified

electrician, who is a member of the N.I.C.E.I.C. and who will comply

with the I.E.E. and local regulations. The wires in the mains lead are

coloured in accordance with the following UK code:

Blue = Neutral, Brown = Live, Green/Yellow = Ground

If you only find two wires in the main’s lead (blue and brown),

then neither must be connected to the earth terminal.

o As the colours of the wires in the appliance’s mains lead may not

correspond with the coloured markings identifying the terminals

in your spur box, please proceed as follows:

o The blue wire must be connected to the

terminal marked “N” (neutral), or coloured

black.

o The brown wire must be connected to the

terminal marked “L” (live), or coloured red.