User manual

21
2)
at you made in step 11. Insert raw plugs into the holes and then use
screwdriver to secure the fixing bracket to the wall.
ng
o C. Then
wall, using the same method as
you have just used to secure the lower bracket.
13) L
brack
1 Using a 6 mm drill bit, drill out two holes on the pencil markings
th
a
o Refit chimney section C to the hood and fix it onto the hood
using the two screws that are supplied.
o Secure the top of chimney section C to the fixing bracket, usi
the screws provided.
Slide chimney section D inside of chimney section
secure the upper bracket to the
ift chimney section D up to the ceiling and secure it to the fixing
et using the screws provided.