User manual

14
7) Finally, fix the cooker hood to the cabinet with the wood screws supplied
(‘G’ in figure).
8) Remount the frame (if provided) and the suction (grease filter) grille
(‘H’)
Note on Connecting spigot for ducting to your cooker hood. Your hood
must be connected to its exhaust spigot by the following method.
Remember! Connect ducting for extraction
function if you intend to use your hood as
an extractor.
Ensure that you use 125mm ducting and
that an exhaust hole of about 130mm is
bored into your cabinet / kitchen unit to
accommodate it.
INSTALLATION INSTRUCTIONS
–
installin
g
y
our Cooker Hood
REMEMBER TO KEEP YOUR HOOD SECURE
WHILE YOU WORK IT INTO PLACE!