Operation Manual

13
ALL NEEDED SCREWS &
RAWLPLUGS ARE INCLUDED
INSIDE YOUR HOOD.
: The cooker hood must not
be fitted above stoves with a
radiant top plate.
:
We recommend that at least
two people install this hood.
:
Do not tile, grout or silicone
this hood to the wall.
1) Your Baumatic Cooker Hood should only be fitted into the underside of a
dedicated cabinet / kitchen unit. Do NOT position it any less than 700 mm
(70 cm) above the hob.
2) Remove the metal anti-grease grille.
Preparing the cabinet Note: ‘(E)’ will appear at the beginning of an instruction
concerning how to fit the unit for the extraction function.
3) Create an opening in the bottom of
the cabinet to insert the cooker
hood and (E) drill a hole in the top
of the cabinet to fit the discharge
(extraction) tube.
4) (E) Connect the cooker hood to
an external pipe, predispose the
electrical connection.
5) Remove the grill or the anti-grease
filter. Remove the frame ‘C’
provided by pressing on the two
release hooks (‘D’ in picture).
6) Insert the cooker hood into the
opening. Note – your cooker hood
comes with fixing screws (as
shown in figures below).
INSTALLATION INSTRUCTIONS
–
installin
g
y
our Cooker Hood
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
COOKER HOOD THAT YOU CAN ADAPT
IT AS AN EXTRACTION FAN.
PLEASE SEE BOXED NOTE BELOW ON
PREPARING THE CABINET.