User manual

Operating Your Extractor
The light can be switched on or off regardless of fan / motor operation to illuminate the cooking area.
The extractor fan has three speed settings for light, medium or heavy extraction of cooking vapours.
The different levels of extraction are numbered I, II & III and can also be recognised by the changes in
noise level of the extractor fan when operating.
IIIII
For Your Safety
In order to protect your appliance and minimise the risk of fire, don't barbecue food directly under the
extractor. Similarly, do not prepare flambé dishes immediately under the extractor. If you use a gas
hob, don’t remove pots without first turning off the flame.
Your extractor is designed to draw gases up and away from your hob. This means that exposed flames
may behave unpredictably in the vicinity of the appliance whilst it is switched on. When frying take
particular care to prevent the oil from catching fire and never leave the hob unattended.
General Cleaning
Always switch off the electricity supply prior to cleaning.
Wipe the external surfaces of the extractor regularly using warm water and mild detergent.
Never use abrasives or wire wool since these will damage the appliance.
Changing The Light Bulb
Always switch off the electricity supply prior to changing the bulb. To replace a bulb simply
remove the fascia grille , unscrew the bulb and replace with one of an identical wattage. Replace the
facia grille.
8