User manual

o Ensure that all electrical connections are carried out by a suitably
qualified person.
18
inside the product and ensure that there is no transit
packaging or any other materials, such as packets of screws,
wall and
ceiling. If this is not possible, then a thick, protective covering
o Select a flat surface for assembling the cooker hood. Cover that
o Do not tile, grout or silicone this appliance to the wall or
is designed to be surface mounted
only.
y
CTION MODE OR RECIRCULATION
MODE. PLEASE TURN TO PAGE 21-22 NOW TO
WEEN THESE
TWO MODES.
d that two people install this hood.
o It must be positioned at least 700 mm above the hob
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED
TER
o Before commencing installation of the cooker hood the grease
filter should be removed.
o Check
guarantees etc. These should be removed and kept for future
use.
o If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear
should be placed over the worktop, hob top or cooker. This will
help to protect these surfaces from damage and debris.
surface with a protective covering and place all cooker hood
parts and fittings on it.
cabinetry. This appliance
Installing our cooker hood
IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE
IT IN EXTRA
UNDERSTAND THE DIFFERENCES BET
o We recommen
o Your cooker hood should only be fitted into the underside of a
kitchen unit.
underneath it. You cannot fit this product by securing it between
two cupboards.
TO YOUR MAINS SUPPLY AF
THE REST OF THE
INSTALLATION PROCESS HAS BEEN COMPLETED.
1) Remove the metal grease filter (A).