User manual

lectrical connection

o The cooker hood’s power cable must be fitted upstream from the

ARNING: THIS APPLIANCE MUST BE EARTHED. It

YOUR COOKER HOOD IS INTENDED FOR FITTED AND

PERMANENT INSTALLATION.

electrical connection, using an omni-polar switch with

distance of at least 3 mm. THE FUSE MUST BE RA

AMPS.

a contact

TED AT 3

should only be connected by a competent person, using

fixed wiring via a double pole switched fused spur outlet.

(UK ONLY).

We recommend that the appliance is connected by a qualified

ill comply

ith the I.E.E. and local regulations. The wires in the mains lead are

lue = Neutral, Brown = Live, Green/Yellow = Ground

erminal.

in your spur box, please proceed as follows:

black.

o The brown wire must be connected to the

stallation area. In addition check whether there is an

electrical socket available that will be accessible once the hood is

uld also be space to connect a ducting hose to the

outside.

ssary masonry work prior to the fitting of the

cooker hood.

electrician, who is a member of the N.I.C.E.I.C. and who w

coloured in accordance with the following UK code:

If you only find two wires in the main’s lead (blue and brown),

then neither must be connected to the earth t

o As the colo

correspond

urs of the wires in the appliance’s mains lead may not

with the coloured markings identifying the terminals

o The blue wire must be connected to the

terminal marked “N” (neutral), or coloured

terminal marked “L” (live), or coloured red.

Before beginning installation

o Check that the product purchased is of a suitable size for the

chosen in

mounted. If the product is going to be used in extraction mode,

then there sho

o Carry out all nece