User manual

31
Installation
IMPORTANT: THIS INSTALLATION MUST BE
COMPLETED BY A SUITABLY QUALIFIED PERSON.
BAUMATIC ONLY SANCTION THE INSTALLATION
GIVEN IN THIS INSTRUCTION MANUAL. YOU
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE
YOU NEED TO TRANSPORT THE MACHINE IN THE
FUTURE.
Unpacking the machine and removing the transit bolts
o Remove the polystyrene base
and place the machine near
its permanent position (1).
o Carefully cut through the
hose retaining clip at the
rear of the appliance, taking
care not to cut the hose
(2).
o Remove the 4 fixing
screws A and remove the
spacers B (3).
o It is possible for the
spacers to fall inside the
machine so you should
gentle tilt the appliance to
remove these.
o Cover the 4 holes using the
caps provided (4).
o We recommend that you
keep the transit bolts to
immobilise the machine for
future transit.