User manual

29
drained away.
2) No Spin option selected
for machine to
empty
2) Choose a spin
speed using the
spin speed control
knob (H)
Machine vibrates a lot
during the spin.
1) Washing machine not
completely level
2) Transit bolts not
removed yet
3) Load not distributed
evenly
1) Alter the adjustable
feet
2) Remove the transit
bolts
3) Rearrange the
laundry evenly
Door will not open. 1) 2 minutes have not elapsed
since the program finished
1) Wait 2 minutes
The machine makes a
different noise when
spinning.
This is due to the brush motor
which ensures better
performance.
N/A
Only a small level of water
can be seen in the drum.
Water level automatically set
according to the load size so
may seem less than usual.
N/A
IMPORTANT: Your appliance has an unbalance control system.
If this system detects that the washload is unevenly distributed
inside the drum. Your washing machine will try to redistribute
the load before spinning. If after several attempts it is unable
to redistribute the washload, then the appliance will either spin
at a slower speed or skip the spin cycle and drain.
Uneven load distribution can be caused by too large a wash
load or too small a wash load. It can also occur if a single item
is washed inside the appliance.
IF AN ENGINEER ATTENDS DURING THE
GUARANTEE PERIOD AND FINDS THAT A FAULT
HAS BEEN CAUSED BY AN ITEM IN THE ABOVE
TABLE, WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER, THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.