User manual

21
Selecting a wash program
o Load your laundry and put detergent in the relevant
compartment of the soap drawer.
o Close the porthole door firmly.
o Select the most appropriate wash program for the garments that
you are washing, by turning the program selection knob.
o Select any program options by using the easy iron button, extra
rinse button or cold wash button.
o Any program option that you select, will affect the length of time
that the wash cycle will take to complete.
o Alter the spin speed, if required, using the spin speed
button.
o Press the Start / Pause button.
o After approximately 5 seconds, you will hear your washing
machine start the wash cycle.
o If there is a power failure or the plug is pulled out of the
socket when a wash cycle is in progress, once power has
been restored, the wash program will continue.
o Whilst the wash program is in progress, the time remaining to
the end of the wash cycle will appear on the display.
Cancelling or pausing a wash program
o To stop a wash program once a wash cycle is in progress,
you should press and hold the Start / Pause button for
about 2 seconds.
o To cancel the program, turn the program selection knob to the
OFF position.
o If you wish to add or remove items the door will remain locked
for two minutes before it is possible to open the door.
o Close the door and press the Start / Pause button to continue
the wash cycle.