User manual

20
o The cycle washes with considerable energy saving by using a
temperature of 40°C and alternating spin action with soaking
phases.
o IMPORTANT: The first washing of new coloured fabrics
must be done separately. You should NEVER mix non-fast
coloured fabrics.
o The 30 minute rapid program allows a complete washing cycle to
be carried out in approximately 30 minutes with a temperature
of 30°C.
o When using this cycle it is recommended to use only 20% of the
recommended quantities shown on the detergent manufacturer’s
instructions.
Wash program guidance
o The washing machine automatically selects a spin speed for a
particular wash program. However it is possible to reduce the spin
speed by using the spin speed button.
o Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
o If you use the spin reduction feature, you can make the machine
not go into a spin cycle. If you pick this option, then the machine
will stop with water in the drum.
o Important: Before opening the door of the appliance, you MUST
select the drain program to clear this water.
o The remaining time display shows an approximate time remaining
for the selected wash cycle. Please note that factors external to the
machine, e.g. the temperature of your water supply, your water
pressure etc. can affect the time it takes for the wash cycle to
complete.