User manual

Setting a delay start
After setting a wash program, it is possible to delay the start of it by
up to 24 hours.
9 Load your laundry and put detergent in the relevant
compartment of the soap drawer.
9 Close the porthole door firmly.
9 Select the most appropriate wash program for the garments that
you are washing, by turning the program selector knob.
o The LCD display will briefly flash the wash program number that
you have selected and then show the approximate time that it
will take the chosen wash cycle to complete.
9 Select any program options by using the program option button
underneath the LCD display (for more information, please refer
to the “setting a program option” section).
9 Press the delay start button. H01 will appear on the LCD display
to show that you have delayed the start of the wash cycle for
one hour.
o Each time you press the delay start button, the LCD display will
advance by one hour. You can delay the wash cycle by a
maximum of 24 hours.
9 If you wish to cancel a delay start, you should continue pressing
the delay start button until H24 is shown on the LCD display.
Then press the delay start button one more time.
9 Alternatively if you turn the program selector knob to a different
wash program, this will also cancel the delay start.
22