User manual

35
o Remove the 4 fixing
screws A and remove the
spacers B (3).
o It is possible for the
spacers to fall inside the
machine so you should
gentle tilt the appliance to
remove these.
o Cover the 4 holes using
the caps provided (4).
o We recommend that you
keep the transit bolts to
immobilise the machine
for future transit.
IMPORTANT: The transit bolts MUST be removed before your
washing machine is used for the first time.
o Apply the insulation sheet or corrugated material to the base of
the appliance as shown above.
o Peel back the sealing strips (1) and line the insulation sheet up
with the base of the appliance (2). Secure the sheet in place
using the screws as shown (3).