User manual

34
After the final rinse, I can still see foam.
o Modern detergents can result in there still being foam in the final
rinse. This does not mean that the washing is not being rinsed
properly.
There is white residue on my garments when I remove
them from the appliance.
o Modern detergents can contain insoluble contents, and white
residue after a wash cycle is not necessarily a sign of the garments
not being rinsed properly.
o You should shake out the garment or brush it off. In future possibly
turn the garment inside out before it is washed. You may wish to
move from a powder detergent and switch to a liquid detergent
instead.
Installation
IMPORTANT: THIS INSTALLATION MUST BE
COMPLETED BY A SUITABLY QUALIFIED PERSON.
BAUMATIC ONLY SANCTION THE INSTALLATION
GIVEN IN THIS INSTRUCTION MANUAL. YOU
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE
YOU NEED TO TRANSPORT THE MACHINE IN THE
FUTURE.
Unpacking the machine and removing the transit bolts
o Remove the polystyrene base
and place the machine near
its permanent position (1).
o Carefully cut through the
hose retaining clip at the
rear of the appliance, taking
care not to cut the hose
(2).