Operation Manual

- Indicates that softener can be added if required.
- Indicates that detergent MUST be added.
- Indicates that detergent MUST not be added.
Wash program guidance
o The default setting column shows the wash temperature and spin
speed that the appliance will automatically select for a particular
wash program. It is possible to override these settings, using the
spin selection button and temperature selection button.
o IMPORTANT: You should make sure that the spin speed and
temperature that you select are appropriate for the garments
that you are washing.
o The wash cycle times that are quoted and shown by the LCD
display, are intended as a guide only. Please note that factors
external to the machine, e.g. the temperature of your water
supply, your water pressure etc. can affect the time it takes for
the wash cycle to complete.
Drying program guidance
o Check the wash care labels of the garments that you want to
dry, to make sure that they are suitable for drying in a washer
dryer.
o The maximum amount of clothing that can be dried in your
appliance in a single drying cycle is 3kg. If the washer dryer is
overloaded, then the drying performance will be affected and
clothing may come out creased.
o The spun dry clothes should be taken out of the drum after a
wash cycle. Garments should be unfolded and shook out before
being placed back inside of the drum.
o DO NOT attempt to dry clothing that has not been spun dry.
o Only dry garments of the same fabric type in a single drying
program. If heavy and light fabrics are dried in the same drying
cycle, then you will get uneven drying performance.
o When drying larger garments, it is advisable not to place more
than two garments in the appliance at once.
16