BWC614SS 140 cm 92 Bottle dual temperature wine cooler
User manual for your Baumatic BWC614SS 140 cm 92 Bottle dual temperature wine cooler NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your wine cooler Dimensions Description of the appliance Control panel Description of the product features 7-10 7 8 9 9-10 Using your Baumatic wine cooler Before switching on During first use Switching on the appliance and setting the temperature Changing between Fahrenheit and Celsius Safety lock The humidity control box Loading the wine cooler 10-16 10-11 11 11-12 12 12 13 13-14 Storing your wines Wine storage problem
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Customer Care Department. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your wine cooler o o o o o o o o o o o o o o o o o o Gross capacity: 275 litres Net capacity: 265 litres Bottle capacity: 92 x 0.
Description of the appliance 1) 2) 3) 4) 5) 6) Digital control panel Stainless steel door frame Stainless steel handle Middle zone divider Adjustable wooden shelves Adjustable feet 8
Control panel The control panel is located at the top of the appliance. 1) 2) 3) 4) 5) 6) 7) 8) 9) Power button Celsius / Fahrenheit selector button Temperature minus button Temperature plus button LED display Light control button Amber LED indicator for sparkling wine Green LED indicator for white wine Red LED indicator for red wine This icon indicates that the control panel is for the upper cooling zone. This icon indicates that the control panel is for the lower cooling zone.
2) Two cooling zones o There are two cooling zones inside of your wine cooler; they are separated by a middle partition. o Each cooling zone has an independent temperature control and temperature display. 3) Interior light o The wine cooler has an interior light. The light can be switched on and off by using the light control button (6). 4) The wine cooler shelves o The wooden shelves are fully adjustable to suit various wine bottle shapes and sizes.
o There can be an odour when you first switch on the appliance. It will lessen as the appliance starts to cool. During first use IMPORTANT: When you use the wine cooler for the first time or restart the appliance after it has been turned off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED display. This is normal and it is due to the length of activation time.
decrease by the same amount if you press the minus (3) button once. o When you set a new temperature for either of the zones, the display will show this temperature for 5 minutes before showing the actual zone temperature. During this time, the zone temperature will adjust accordingly. o When you are storing mostly red wines, the temperature needs to be set at 15°C - 22°C / 58°F - 71°F. The red LED lamp for red wine will light.
The humidity control box (optional) The wine cooler is equipped with a system for maintaining the correct level of humidity for wine storage. o Fill the small plastic reservoir (humidity box) ¾ full with water and replace. The humidity box is located on the top shelf and secured by runners. o Check the water level regularly and refill as necessary. o IMPORTANT: Please ensure the reservoir is positioned correctly on the runners to avoid the possibility of water spillage.
Storing your wines The chart below indicates the ideal storage temperatures for different types of wine:Type of wine Red wine (*) White wine (**) Sparkling wines/champagne Rose wine Vintage wine Temperature (Celsius) 15.5 – 18.5°C 10 - 15°C 7.2 – 9.5°C Temperature (Fahrenheit) 59.9 – 65.3°F 50 – 59°F 45 – 49.1°F 9.5 – 10.5°C 13°C 49.1 – 50.9°F 55°F * Light red wines, such as Beaujolais, Pinot Noir and Cabernet Franc benefit from being served slightly cooler than full-bodied reds.
o Wines kept at a higher temperature will age faster. Wine that is exposed to temperatures that are greater than 22°C (71°F) will suffer from poorer flavour and aroma. o If wine is kept at too low a temperature, this can result in the development of harmful deposits. A humidity of 70% is ideal for keeping corks from shrinking. o After a bottle of wine has been opened, the wine comes into contact with air.
Wine storage problems Corking- a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork. As unfortunate as this is, there is nothing to do but to discard all of the wine in the affected bottle. This is not to be confused with small fragments of cork floating in the wine itself, which will not impair the flavour.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cooler should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
o You should be careful to make sure that wine bottles do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of your wine cooler. Removing the shelves for cleaning o To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of wooden shelf is exactly under the plastic post and lift the wooden shelf. Please ensure these are replaced when the shelf is put back.
Power failure o Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. o If the power is going to be off for a longer period of time, you need to take the proper steps to protect the contents. IMPORTANT: If the appliance is unplugged, the power is lost or turned off you must wait 3 to 5 minutes before restarting the wine cooler.
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the wine cooler.
o When the connection is completed, no stray strands or cut wire should be present. The cord clamp must be secured over the outer sheath. Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.
Built-in installation o Your wine cooler can be used as a freestanding or a built in unit. If you are going to use it as a built in unit, then the dimensions shown in the diagram above will need to be followed. o In particular the depth dimension must be observed. o IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this vent; otherwise your wine cooler may not operate properly.
o Remove the door gasket on the side you wish to install the handle. You can see two designated holes for handle installation. o Install the handle tightly as shown in the diagram above with the two screws, lock washers and flat washers provided. o Replace the door gasket. Reversing the door of your wine cooler This appliance has the capability of the door opening from either the left or right hand side.
o Remove the right lower door hinge. Take the left lower door hinge from the plastic bag that contained this manual then install it at the designated position on the left side. Install the door shaft assembly accordingly. o Remove the door axle from the right upper hinge then install and tighten it in the left upper hinge. o Set the glass door to the designated position and install the two lock screws to connect the door shaft assembly with the glass door and tighten them before the door is levelled.
IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have completed the door reversal process. After the door has been reversed, you should check the door seal of the wine cooler. The seal should not be creased or crushed; otherwise there will be a gap between it and the inside of the door. o The seal must adhere properly all the way around the door.
Troubleshooting IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. PROBLEM Appliance does not operate Temperature inside the appliance is too warm. Temperature inside the appliance is too cold Vibration Moisture is forming on the inside of the appliance. Moisture is forming on the outside of the appliance. POSSIBLE CAUSE Not plugged in. The circuit breaker has tripped or the fuse has blown.
IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Customer Care Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Lípovà 665 460 01 Liberec 4 Czech Republic +420 483 577 200 www.baumatic.cz Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 Slovakia Baumatic Slovakia, s.r.o. Galvániho 7/D Slovakia E-mail: sales@baumatic.co.