User manual

o You can also pour a small amount of water down the drain hole
to clean inside of it.
o You should be careful to make sure that wine bottles do not
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your wine cooler.
Removing the shelves for cleaning
o To remove any of the shelves from the rail compartment, move
the shelf to the position where the notch of wooden shelf is
exactly under the plastic post and lift the wooden shelf. Please
ensure these are replaced when the shelf is put back.
o Make sure the shelves are fully engaged before loading any
bottle into the cooler. Pull the shelves out all the way to the
STOP position and push them back in several times to make sure
the shelves are properly engaged.
Moving your wine cooler
If you need to move your wine cooler to another location you should
follow the steps outlined below.
o Remove all items from the wine cooler.
o Securely tape down all loose items such as the shelves inside the
appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Be sure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a
blanket or similar item.
17