User manual

o To view the set temperature in both zones at any time, press the
plus or minus button. The display will flash the temperature for 5
seconds.
IMPORTANT: When the temperature of a zone is changed, the
compressor works harder to reach the required temperature.
During this time, the side panels of the wine cooler can reach
up to 45°C however they will cool down when the set
temperature is reached.
Changing between Fahrenheit and Celsius
o You can select whether the temperature displays show Celsius or
Fahrenheit.
o To alter what the temperature displays are showing, press the
plus (5) and minus (6) buttons at the same time for 5 seconds.
o You cannot change the display if you are in the process of
adjusting the temperature of a cooling zone.
The humidity control box (optional)
The wine cooler is equipped with a system for maintaining the correct
level of humidity for wine storage.
o Fill the small plastic reservoir (humidity box) ¾ full with water
and replace. The humidity box is located on the top shelf
and secured by runners.
o Check the water level regularly and refill as necessary.
o IMPORTANT: Please ensure the reservoir is positioned
correctly on the runners to avoid the possibility of water
spillage.
Loading the wine cooler
o IMPORTANT: Your appliance is ideally suited to store
0.75 litre Bordeaux style wine bottles. Whilst it can
store larger bottles, you must make sure that they do
not prevent the door from shutting properly.
o Always check that you can close the door without it fouling
on a wine bottle, before shutting it.
o When loading several bottles of wine at once, it will take
longer for the appliance to cool the individual bottles.
12