User manual

24
o Be careful to support the glass door with both hands to prevent
it dropping after removing the screws.
o Pull down to remove the glass door and place it on a padded
surface to prevent scratching it.
o Remove the right top hinge
and right lower hinge.
o Take the left top hinge and left
lower hinge from the plastic
bag that contained this
manual then install them in
the designated positions on
the left side of the cabinet.
o Turn the glass door around
180° and reinstall it.
IMPORTANT: Check that the door opens and shuts correctly,
without fouling, after you have completed the door reversal
process.
After the door has been reversed, you should check
the door seal of the wine cabinet. The seal should
not be creased or crushed; otherwise there will be a
gap between it and the inside of the door.
o The seal must adhere properly all the way around the door.