User manual
17
o You should be careful to make sure that wine bottles do not
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your wine cabinet.
Removing the shelves for cleaning
o To remove any of the shelves from the rail compartment, move
the shelf to the position where the notch of the wooden shelf is
directly under the plastic post and lift the wooden shelf. Please
ensure these are replaced when the shelf is put back.
o Make sure the shelves are fully engaged before loading any
bottle into the cabinet. Pull the shelves out all the way to the
STOP position and push them back in several times to make sure
the shelves are properly engaged.
Moving your wine cabinet
If you need to move your wine cabinet to another location you should
follow the steps outlined below.
o Remove all items from the wine cabinet.
o Securely tape down all loose items such as the shelves inside of
the appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure the appliance stays secure in the upright position during
transportation. Also protect the outside of the appliance with a
blanket or similar item.