User manual

20
o Tilt the appliance approximately 60° to allow access to the
adjustable feet.
o Take care to ensure the cabinet is supported at all times.
o Twist the foot into a suitable position to level the cabinet.
o Repeat these steps for the other adjustable feet.
IMPORTANT: If the appliance is not level, then the door and
door seal may be affected.
IMPORTANT: Do not move the appliance when the feet are
adjusted high.
Installing the handle
o Remove the door gasket on the inside of the door to expose the
two screw holes.
o Install the handle using the screws and washers provided.
o Replace the door gasket.