User manual

Extraction / Air Purifier Modes of O
p
eration
EXTRACTION OPERATION – Installation Instructions
 Ensure t
union (‘N’) to the upper part of the
hood usi
screws supplied inside the packing
(Fig. –
diamete
(N) on the od
(see F g. 1) to the discharge outlet
for cook
section of
 PLEASE NOTE: If there is no
discharg
be fitted
building, m ll
that i rge enough to fit a wind
and rain
section of at least 150 cm
² and
conne
the u
hat you have fitted the
ng the packaged two
1 on right). Using a 125 mm
r pipe, connect the union
upper part of the ho
i
ing vapours with a cross-
at least 150 cm
².
e outlet and the hood is to
to an outside wall of the
ake a hole in the wa
s la
-proof shutter with a cross
ct this to the outlet union of
nit by means of a pipe.
__________________________________________________________________________________________________________________________________________________________________________________________________________________________
.
AIR PURIFIER (RECIRCULATION) OPERATION - Installation
Instructions
The cooker hood can be
converted to work as an air
purifier in the event that there is
no provision for an external air
discharge duct.
In this case, air is recycled through
the vent ‘R’ (Fig. 1 – above). When
using the unit as an air purifier, you
need to install two active carbon
filters to absorb cooking vapours
(please see page 11).
Please note: For the extraction function, you
will need to connect a 125 mm diameter
outlet chimney to the spigot ‘N’ in fig. 1
above. This pipe is not provided with your
cooker hood. See fi
g
ure on left.
19