User manual

2
¾ Remove the metal grease filters from the hood
¾ Slac
ATTACHING THE GLASS
ken both anchoring screws “F”
in
¾ Tightening the screws ‘F’ again in the hole and connecting
them to the unit.
¾ Take care that the anchoring corner is firmly fastened,
tightening it well.
¾ Re-insert the ventilation tube with the coupling tube ‘N’.
PLEASE NOTE * DO NOT OVERTIGHTEN THESE SCREWS OR YOU
MAY DAMAGE / DISTORT THE UNIT.
¾ Place the glass ‘Q’ on the upper shelf of the hood, pushing it
towards the wall.
18