User manual

that at least

od.

NOTE: Your Baumatic Cooker Hood shou

NOT posi

1) Remov

INSTALLATION INSTRUCTIONS

–

Installin

our Cooker Hood

The cooker hood must not

be fitted above stoves with a

radiant top plate.

We recommend

two people install this ho

ld only be fitted on a wall. Do

tion it any less than 700 mm (70 cm) above the hob.

e the metal anti-grease filters

ee figure at right).

2) Position the hood against the wall and mark the position of the support

holes that are to be drilled as shown in the figure below. These support

holes can be found on Fig. 4 on next page marked as ‘D’ with the anchoring

holes marked as ‘E’ (Fig. 4 on next page). If you hood comes with an

make the marks for the screw holes.

attached jig, use that as a guide to

PLEASE NOTE THAT YOU WILL HAVE

TO DECIDE BEFORE INSTALLING YOUR

COOKER HOOD THAT YOU CAN ADAPT

IT AS AN EXTRACTION FAN. PLEASE

SEE PAGE 18 NOW TO UNDERSTAND

CRUCIAL DIFFERENCES IN THESE.

Anti -

Grease

Filter