Operation Manual

11
a) Changing the light bulb
9 Before changing the light bulb, ensure that the appliance is not
live (i.e., ensure that you have switched it off so that it’s in the
"Off"
position).
9 Remove the anti-grease grille (‘2’ in figure above) to access the
lamp area (see page
8 for the process).
9 Remove the damaged light bulb.
9 Change the incandescent bulb
using only olive-shaped spares with
an E14 coupling, max. 40W.
* PLEASE NOTE - Defective bulbs should be replaced
immediately.
9 Replace the metal anti-grease filter grille.
_________________________________________________________________________
Maintenance - Changing the Light Bulb
The hood can be
ducted from the
top or rear: Fig
2.1 , or can be
used in
recirculation
mode by adding
carbon filters: Fig 2.2