BT06.6ME/BT08.
User Manual for your Baumatic BT06.6ME/BT08.6ME Cooker Hood NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference.
CONTENTS YOUR COOKER HOOD’S SPECIFICATIONS ….……………..………….3 IMPORTANT SAFETY INFORMATION……………………………….…4-5 CARING FOR THE ENVIRONMENT…………………………………………6 USING YOUR COOKER HOOD………………………………..……………..7 MAINTAINING AND CLEANING YOUR COOKER HOOD ……….8-11 INSTALLATION INSTRUCTIONS ……………………….……...….12-16 CARBON FILTER …………..12 ELECTRICAL CONNECTION……………13 INSTALLING THE COOKER HOOD……14-16 TROUBLESHOOTING ……………………………………………17 CONDITIONS OF GUARANTEE……………………………………………18 CONTACT DETAILS…………………………………………………………..
Specifications of your BT06.6ME/BT08.6ME Cooker Hood Congratulations on purchasing a Baumatic Cooker Hood! To fully enjoy using your appliance long into the future, please firstly familiarise yourself with its specifications, safety advice and operational instructions included in this manual. You will also need this manual to ensure that your Cooker Hood has been installed properly. BT06.6ME/BT08.6ME DIMENSIONS Width: Depth: Height: 600 mm 270 mm 400 mm Your new Cooker Hood is fitted with: BT08.
Important Safety Information: Please Read this before installing & using. o Any installation work must be carried out by a qualified electrician or competent person. o The hood must be installed in accordance with the installation instructions and all measurements followed. o If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance with the Gas Safety Codes of Practice BS.6172, BS.5440 & BS.6891 (Natural Gas) and BS.
Important Safety Information: Please Read this before installing & using. o Ensure the ducting for the extractor function has the same diameter as the outlet hole all the way through. o Keep young children from using, playing with or tampering with the cooker hood. Older children and infirm persons should be supervised if they are using the cooker hood. o Your cooker hood is for domestic use only. o Please dispose of the packing material carefully – children are especially vulnerable to it.
Environmental Note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. CONFORMITY TO W.E.E.E.
Using your Baumatic Cooker Hood: To use your cooker hood: 1) 2) 3) Make sure it has been properly installed. Find the CONTROL PANEL. It is located on the hood’s front surface near the bottom of the unit. The CONTROL PANEL contains two rows of switches. These perform separate functions. You will need to understand what both switches do before you attempt to use your cooker hood. * Note: The hood should be switched on at least as soon as you start cooking.
Cleaning your Baumatic Cooker Hood: * IMPORTANT!: Before cleaning, always ensure that you have switched your cooker hood OFF at the omni-polar switch, set at the wall from the cable: Cleaning  Clean the external parts with mild liquid detergents on a damp cloth.  Never use abrasive powder, corrosive solvents or brushes.  Never insert pointed objects into the motor’s protective grid.  Only clean the control panel and filter grill with a damp cloth and delicate detergents.
Grease Filter Maintenance - Cleaning the Anti-grease Filter First remove the grille by pulling down on the catches marked H1 in the above diagram. - You can now clean the grease filter. Please note: - Grease Filter: Your cooker hood is supplied with a white paper grease filter that must be replaced once a month.
Maintenance- Cleaning the Grease Filter To Remove the Grease Filter: - First remove the retaining metal wires: “W” and extract the grease filter.
Maintenance - Changing the Light Bulb a) Changing the light bulb 9 Before changing the light bulb, ensure that the appliance is not live (i.e., ensure that you have switched it off so that it’s in the "Off" position). 9 Remove the anti-grease grille (‘2’ in figure above) to access the lamp area (see page 8 for the process). Remove the damaged light bulb. 9 9 Change the incandescent bulb using only olive-shaped spares with an E14 coupling, max. 40W.
CARBON FILTER Your Baumatic Cooker Hood uses CARBON FILTERS to purify the air for the air recirculation function. You will find that one filter will attach over the front of the fan motor (please see figure at bottom of page). The active carbon filter must be replaced regularly, at least once every four months, to allow normal operation. Before starting to fit the carbon filter, turn the omni-polar switch to ‘0’.
Installation IMPORTANT: Before installation and usage, read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found behind the grease filters.
Mounting Expansion wall plugs are provided to secure the hood to most types of walls/ceilings. However, a qualified technician must verify suitability of the materials in accordance with the type of wall/ceiling. The wall/ceiling must be strong enough to take the weight of the hood. Do not tile, grout or silicone this appliance to the wall. Surface mounting only.
Mounting and Installation 15
Mounting and Installation 16
Troubleshooting If something has gone wrong with your Cooker Hood, checking against this chart might keep you from having to call for service. Symptom The cooker hood will not start! The cooker hood is not working effectively! The cooker hood has switched off during operation! Solution • Check that the hood is connected to the electricity supply. • Check that the fan speed control is set properly. • The fan speed is not set high enough. • The grease filter is dirty.
Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Baumatic appliance comes complete with a free 12 month guarantee covering both parts and labour costs resulting from defective materials or workmanship. Baumatic also gives you the opportunity to automatically extend the guarantee period for a further 12 months at no extra cost, giving an initial guarantee period of 24 months. The extended guarantee period applies to England, Scotland, Wales and Northern Ireland only.
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail: sales@baumatic.co.uk technical@baumatic.co.uk Http (Internet site): www.baumatic.
19
