Operation Manual

4. Measure a distance of 1050 mm between the highest point on
the hob top and the wall that you will be fixing the hood to. You
should also measure and record the distance between the top of
the extractor mounting brackets (D).
o Using a pencil, mark this height and then attach the two
mounting brackets (G) to the wall at this height, using the
screws provided. They should be positioned the same distance
apart as the extractor mounting brackets (D). IMPORTANT:
These screws must be securely tightened.
o Hook the extractor mounting brackets (D) that you fixed to
the hood in step 3, onto the mounting brackets (G).
5. Some adjustment is provided within the extractor mounting
brackets. Use screw (E) to adjust the front to back alignment of
the hood. Use screw (F) to adjust the height alignment of the
hood.
o Once you have finished adjusting the position of the hood,
fully tighten all of the screws.
19