User Manual

Setting the start and end of cooking time function
This function will allow you to set a time in the future that the oven
switches on at and a time that the oven will switch off at.
o Prepare the food that you wish cook and place it in the oven. Set
the required cooking function and temperature.
o To enter the cooking time setting mode press the
timer button once. The cooking time symbol will
light up.
o The display will show “00:00” and the “:” symbol will flash to
indicate that you can set the cooking time.
o Use the plus and minus buttons to program the
cooking time required.
o When the timer display shows the correct cooking
time immediately press the timer button again to
enter the end of cooking time setting
mode. The end of cooking symbol will light up.
o The display will show a proposed end of cooking time by adding
the cooking time previously set to the current time of day. The
“:” symbol will flash to indicate that you can adjust the end of
cooking time.
o Use the plus and minus buttons to program the time of day that
you wish for cooking to stop at. When the display shows the
correct end of cooking time release all buttons and in a few
seconds the “:” will remain steady and the timer function will be
set.
o The oven will go into standby mode and the oven light will turn
off. The oven will calculate what time it needs to switch on at
based on the cooking time you have set and the end of cooking
time that you have programmed.
o When the programmed time of day is reached the alarm will
sound and the oven will stop heating. The display will show the
words “Program finished remove the dish”. Press any button to
silence the alarm or open the oven door.
o If no other buttons are pressed, the oven will switch off
automatically after 1 minute.
16