User Manual

o To change the operating language press the oven
light button and the plus button simultaneously when
the oven is not in use. You will then be able to set
the required language by following the steps above.
Setting the time of day
o After setting the operating language during the initial start up
you can then proceed to set the current time of day which will
appear on the display.
o To enter the time setting mode, press and hold the timer
button for about 3 seconds. The “:” symbol will flash to
indicate the oven has entered the time setting mode.
o Use the plus and minus buttons to set the current
time of day. When the correct time appears on the
display, release all buttons and in a few seconds the
“:” symbol will remain steady and the time will be set.
Turning the appliance on
o To switch the appliance on press the power button.
o After you have turned the appliance on, if no other buttons are
pressed within 1 minute, the oven automatically switches back
off.
o Press the power button to turn the appliance off after
cooking.
Demonstration mode
o Whenever there is a power failure or the oven is disconnected
from the power supply, when it is switched back on the oven will
automatically enter demonstration mode.
o Each of the control panel icons will light in turn and the display
will show the word “Demo”. The oven cannot be operated while
in this mode.
o To exit the demonstration mode and use your oven in
normal operation, press and hold the oven light button
for 5 seconds. The oven will then return to normal
operation.
12