Operating instructions

BAUMATIC BFD46W dishwasher user manual
12
12
STARTING A WASH CYCLE
1) MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’).
4) POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’).
5) TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE UNTIL THE
DIAL POINTS TO THE SYMBOL FOR THE CYCLE SETTING. SEE THE ‘WASH CYCLE TABLE’ ON
THE NEXT PAGE.
6) PRESS THE ON/OFF BUTTON – THE ON/OFF LIGHT WILL TURN ON. AT THIS POINT, THE WASH
CYCLE WILL BEGIN.
.
Approximate Timing of Wash Cycles
Intensive
(strong) 114
mins.
Normal
108
mins.
Economy
90
mins.
Rinse
76
mins.
Glass
50
mins.
Rapid
30
mins.
Soap
7
mins.