User manual

MID-SETTINGS: Use these settings for long-term storage

of food

in the freezer.

HIGH SETTINGS: Use these settings to freeze fresh food in your

freezer and to keep food extra cold in your refrigerator.

NOTE:

On maximum setting, your appliance will work harder to maintain

this low temperature so after you reach this temperature, you should turn

the knob to a milder setting (depending on long or short-term storage

intentions).

REMINDER: Allow the unit time to settle after delivery. If your plug

and power socket are now behind the fridge and you still need to move the

unit into place, be especially careful:

Remember to leave a safe

distance between the back of the fridge and the wall.

You switch your Fridge-Freezer OFF by

turning the thermostat knob to position ‘0’.

NOTE: When you first switch on the appliance, allow 24 hours for

it to cool down to the desired temperature. During this time, DO

NOT open the door often or place a lot of food inside the unit.

WARNING! If the appliance is switched off then switched back on

again after a short period, the compressor will start up again after

approximately half-an-hour. This is part of the normal operation of the

appliance.

USING

our Baumatic BF207 FRIDGE-FREEZER: