User manual

21
5) Connect the cooker hood to the mains supply and turn the cooker
hood on by pressing the power button for 3 seconds. This will open the
decorative cover. Disconnect the cooker hood from the mains supply.
The decorative cover will stay open. Remove the grease filters.
6) Screw ST4*30 screws into the holes at the back of the cooker hood
as shown in the drawing below.
Connecting to external ducting
8) Connect the coupling to the top of the cooker hood, and then
connect a 125 mm ducting hose to the coupling (please note that the
ducting hose is not supplied with the appliance).