User manual

20
Installing your cooker hood
o We recommend that at least two people install
this hood.
o Please note that the styles of cooker hood shown in the
line drawings on the following pages are sometimes
different to the shape of the BEO910BGL. However the
installation method shown is correct and MUST be
followed.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
1) Position the hood against the wall that you are intending to install it
on and mark the position of the screw holes at the back of the hood
that are to be drilled (as shown in the figure above).
2) Using a drill bit with an 8 mm diameter, make holes in the wall on
the positions that you have marked.
3) Put the rubber stoppers in the holes and screw ST4*30 screws into
the two top holes.
4) Hang the cooker hood onto the fixing screws.