User manual

14
o Repeat the process if required.
o Refit the grease filters once they
have dried and press and hold
the power button for 3 seconds to
close the decorative lid.
o IMPORTANT: Let the grease
filters dry thoroughly before
refitting them in the cooker
hood.
Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o Prior to touching the light bulbs ensure they are cooled down.
o First open the decorative cover and remove the grease filters (as
previously described). When the decorative cover is open,
disconnect the cooker hood from your mains supply. The cover
will stay open.
o Use a screwdriver to lift out the LED light and then disconnect
the light wiring point as shown in the diagram on the next page.