Operating instructions

BAUMATIC BDW15 dishwasher user manual
12
12
STARTING A WASH CYCLE
1) MAKE SURE THAT YOUR DISHWASHER’S PLUG
HAS BEEN PUSHED ALL THE WAY INTO THE WALL
SOCKET.
2)
MAKE SURE THAT THE WATER SUPPLY IS TURNED
ON TO FULL PRESSURE.
3)
LOAD YOUR DISHWASHER (SEE THE SECTION
ENTITLED ‘LOADING YOUR DISHWASHER’, PAGES
8-11).
4)
POUR IN DETERGENT (SEE THE SECTION
ENTITLED ‘SALT, DETERGENT & RINSE AID’),
PAGES 5-7.
5) OPEN THE DOOR, PRESS THE ‘ON/OFF’
BUTTON AND THE ‘ON/OFF’ LIGHT WILL
COME ON.
6) PRESS THE ‘P’ KEY (PROGRAM KEY) TO
SELECT THE ‘WASH CYCLE’. SEE TABLE
ON NEXT PAGE FOR WASH CYCLE TYPES.
7) CLOSE THE DOOR. THE WASHING WILL
START AFTER APPROXIMATELY TEN
SECONDS.
* REMEMBER *: YOU CAN PROGRAM YOUR DISHWASHER UP TO 24 HOURS IN
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE
DESIRED DELAY HAS BEEN SET.
.
Approximate Timing of Wash Cycles
Intensive
(strong) 133
mins
.
Normal
112
mins
.
Economy
106
mins
.
Rinse
51
mins
.
Glass
73
mins
.
Rapid
48
mins
.
Soap
7
mins
.
* Note: Each time you press the delay timer key, you will move the start of your wash cycle forward by one hour.
Delay Timer Key (7)
**** Note: When you turn your dishwasher on, the number ‘OO’ should show on the display. If you see
any other digits, such as ‘17’ or ‘01’, ‘02’, ‘03’, etc., please refer to the trouble-shooting section on page 19.