User manual

Replacing the oven bulb
IMPORTANT: The oven must be disconnected from your
mains supply before you attempt to either remove or
replace the oven bulb.
o Remove all oven shelves, oven pans and drip trays, and then the
side rack that is on the same side as the oven light.
o Remove the light cover and the rubber seal ring by unscrewing the
light cover anti-clockwise.
o Place the glass cover gently on a supported surface, so that
damage is not caused to it whilst the bulb is being replaced.
o Unscrew the bulb anti-clockwise and remove it from its holder.
o Replace the bulb with a 25 W/300°C, E14 screw type pygmy.
o Do not use any other type of bulb.
o Place the rubber seal ring and the light cover back into position and
fully tighten it clockwise.
o Replace the side rack, drip trays and oven shelves.
o Restore power to the appliance.
26