User manual

35
28-30 276LPG -
Butane
98 1600 3800
LPG -
Propane
37 272 98 1600 3800
Ultra-rapid
l 362Natura 20
135-K 1600 3800
62
LPG -
Butane
28-30 284 75/62 1000 3900
LPG -
Propane
37 279 75/62 1000 3900
Oven
115/92 1000 3900
52
(Large/Small)
Natural 20 371
Minimum flow adjustment for hob gas taps.
ied out by a GASSAFE
egistered engineer.
burner and set the knob at the minimum
position.
stment
screw is located beside the valve body.
all bladed screwdriver in the centre of the
tap shaft.
gas flow or
tighten the adjusting screw to decrease the gas flow.
ment is obtained when the flame has a length of
about 3 – 4 mm.
ropane gas, the adjusting screw must be tightly
screwed in.
Refit the control knob.
the gas flow, testing it again
once the adjustment has been made.
IMPORTANT: On completion carry out a gas tightness test.
All work must be carr
r
o Light the
o Remove the knob from the tap. The adju
o Place a sm
o Unscrew the adjusting screw, in order to increase the
o The correct adjust
o For butane/p
o
o Make sure that the flame does not go out by quickly turning from
maximum flow to minimum flow. If it does then remove the control
knob and make further adjustments to
o