User manual

Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves and the
drip tray.
29
holder (3).
with a 25W
300°C, screw type pygmy.
o Do not use any other type of bulb.
lamp cover back into
position.
NSTALLATION
o Remove the light cover (1) by
unscrewing it anti-clockwise.
o Unscrew the bulb (2) anti-
clockwise and remove it from its
o Replace the bulb
o Place the
I
The installation must be carried out by a suitably
qualified person, in accordance with the current
ersion of the following.
and Safety Standards or their European Norm
ulations (issued by the Department of the
ndards (issued by the Scottish Development
Electricity At Work Regulations.
n the rating plate corresponds with your mains supply
oltage.
ARNING: THIS APPLIANCE MUST BE EARTHED.
v
o UK Regulations
Replacements.
o Building Reg
Environment).
o Building Sta
Department).
o IEE Wiring Regulations.
o
Before connecting the appliance, make sure that the supply voltage
marked o
v
W