User manual

12
from
the manufacturing process, you should select the fan oven function
You should make sure that any windows in the room are left open
It is advisable for you not to remain in the room whilst the burning
You should leave the oven on maximum setting for 30 – 40
s cooled, it should then be cleaned with
warm soapy water, using either a sponge or soft cloth. No abrasive
parts of the oven should be cleaned with warm soapy water,
using either a sponge or soft cloth. No abrasive cleaners should be
recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
Before first use
o To remove any residue from the oven that may have been left
and set the thermostat to its maximum temperature setting.
o It is perfectly normal for a smell to be produced during this process.
o
during this process.
o
off process is taking place.
o
minutes.
o After the oven cavity ha
cleaners should be used.
o Outer
used.
o We would
Timer functions
The minute minder function
The minute minder function is a countdown time that can be set on the
ven. When the countdown time has finished, an audible signal will
Press the control knob (1) once or until the minute minder symbol
use the control knob (1) to adjust
the time. Turn the knob right (plus) to increase the time and left
30 minutes. The minimum countdown time that
o
sound.
o
(4) is displayed.
o Whilst the digits are flashing,
(minus) to decrease the time.
o The default time is
can be set is 1 minute; the maximum countdown time is 240
minutes (4 hours).