User manual

Lighting a burner

o Press the relevant burner dial and rotate

anticlockwise to the large flame icon.

Release the dial and the burner will

automatically ignite.

o Matches can also be used to light the burner

during a power cut. Simply follow the

previous step but place a lit match to the

burner as you press the dial. Once lit, keep

the dial pressed for about ten seconds.

WARNING: Extra care should be taken when lighting a burner

with matches. There is a risk of burning as the cooking zone

ignites so take necessary precautions.

Optimum use of the burners

o In order to achieve maximum results with the minimum

consumption of gas, it is important to adjust the flame according

to your needs and to use the appropriate size pans (see table

below).

o When the contents of a pan begin to boil it is recommended that

you adjust the dial to the small flame position.

o Always place a lid on the pan in use.

Burner Diameter of pan (cm)

Triple crown

22 – 24

Rapid 20 – 22

Semi-rapid 16 – 18

Auxiliary 12 - 14

o Always remember to turn the control knob to OFF when cooking

is completed.

o The appliance is equipped with

pan supports (1), on which the

wok support (2) must be

placed. To ensure stability,

position the notch (A) of the

wok support on the pan support

fingers as indicated in the

diagram above.