User manual

28
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Draw out the side guide rails in order to provide access to the
bulb.
o Remove the glass protection cap (C) from the bulb socket by
lifting it with a screwdriver placed between the cap and the oven
wall.
o Replace the bulb (B) with a 15 W/300°C, screw type pygmy.
o Do not use any other type of bulb.
o Screw the lamp cover back into its original position.
Removing the oven door for cleaning
o The oven door can be removed to give easier access to the oven
when cleaning.
o Open the oven door and move the release U-shape element
forward until it is over the tooth in the upper sector of the hinge
(see image below).