Owner`s manual

Precautions
Precautions
14
Repairs may be carried out by customer service of authorised
technicians only!
Before you call customer service, please check whether you can correct the
fault yourself.
A technician will charge you for advice, even during the warranty period.
Clean lint filter and wash condenser.
Empty container.
Check water outlet.
Dryer installation too restricted.
Clean the moisture sensors.
Use next higher drying programme or using
Timer programme.
“ ”Is flashing “ ”Is flashing
“ ”Is flashing
Check the clothes is over load .
Problem
Solution
Display does not
come on
The mains plug is inserted.
Check the programme selected.
Check fuse in the house.
Empty condensation container.
If failure, check hose for condensation outlet.
Clean air cooler.
Clear lint filter.
Dryer does not start
Check the has selected
Check the the door has closed.
Check the programme has set.
start button .
Water is running out
Align dryer horizontally.
Clear air condenser and door seals.
Door is open by itself
Press door until it “clicks”into position.
Degree of dryness was
not reached or drying
time too long
Humidity in the room is
increase significantly
Ventilate room adequately.
Clean the cool grille.
Ensure that the air condenser has been inserted.
If you cannot correct a fault yourself or if a repair is required:
1.Set programme knob to OFF.
2.Pull out the mains plug and call the service.