User manual

6
To use your cooker hood:
1) Make sure it has been properly installed.
2) Find the CONTROL PANEL. It is located at the front of the
canopy. You have a Pushbutton control panel that looks like the
one pictured below.
3) The CONTROL PANEL’s buttons all perform separate functions.
You will need to understand what these do before you attempt to
use your cooker hood.
* Note: The hood should be switched on at least as soon as you start
cooking.
1. Turn on the power; the buzzer will buzz five times. The sound shows that
the appliance is powered.
2. Push the low button, the indicating light 1 on, the buzzer will buzz once,
and the motor runs at low speed. Push it again and the motor will stop.
3. Push the middle button, the indicating light 2 on, the buzzer will buzz
once, and the motor runs at mid speed. Push it again and the motor will
stop
4. Push the high button, the indicating light 3 on, the buzzer will buzz once,
and motor runs on high speed. Push it again and the motor will stop
Using your Cooker Hood: