User manual

37
Electrical connection
ions and in compliance with Baumatic’s
structions.
ge
the rating plate corresponds with your mains supply
oltage.
ARNING: THIS APPLIANCE MUST BE EARTHED.
o
ld
above the appliance and no more than 1.25m
away from it.
o ssible even when your oven is
located in its operating position.
o Cable type: H05 RRF 3 core x 1.5 mm³
Connecting the mains supply cable
rdance with the
llowing code:
ROWN LIVE
o
ins
(L, N, E) which secure the three wires of the
mains cable.
o Fit the cable and refit the cable clamp (A).
o
cleaning, but do not let it hang closer than 50mm to the floor.
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulat
in
Before connecting the appliance, make sure that the supply volta
marked on
v
W
This appliance must be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It shou
not be located
The spur outlet must still be acce
IMPORTANT
The wires in the mains lead are
coloured in acco
fo
GREEN AND YELLOW EARTH
BLUE NEUTRAL
B
Open the mains terminal block cover as shown, unscrew the
cable clamp (A) and unscrew (not fully) the screws in the ma
terminal block
Allow sufficient cable length for the cooker to be pulled out for