User manual

ATTENTION: The probe must NOT be washed with boiling
water.
o When cleaning is complete, dry your hands and then reconnect
the plug to your mains supply.
o If the appliance is not used for long periods, rub a cloth soaked
in Vaseline oil over the inside, in order to coat it with a
protective layer.
o While it is not being used, clean and dry the cell and leave the
door ajar in order to ensure air circulation.
o If it should not be used for a long period, it is wise to disconnect
the appliance from the electricity supply.
Baumatic Ltd declines any responsibility for work carried out on
the appliance which is not in line with the instructions reported
in this manual.
Installation
IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
inside of the freezer.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force,
which are necessary for normal use and the regular operation of the
electric system.
Electrical connection
YOUR BLAST CHILLER IS INTENDED FOR FITTED
AND PERMANENT INSTALLATION.
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.E. and local regulations.
o Your blast chiller’s fuse must be rated at 3 AMPS.
25