User manual

Cans cycle
o Put the cans into the blast chiller as shown in the diagram
below:
o Close the door and press the cans cycle button (6) repeatedly
until the desired time icon is selected. For food class icon details
please see the table on the next page.
Icon 10 10 minutes
Icon 11 20 minutes
Icon 12 30 minutes
o Approximately five seconds after selecting the desired time, the
cycle will start automatically.
o The display will show the time cycle icon (13) and the cans cycle
icon (15) which indicates the chosen cycle has started correctly.
o At the end of the cycle, the progression icons (10, 11 and 12)
will flash together with a buzzer which will last for approximately
twenty seconds. To end the cycle, open the door.
o At the end of the cycle, the chill blaster will switch into
maintenance mode until the door is opened. The cans will remain
in a thermal range of 3°C - 8°C.
o It is possible to interrupt the cycle at any time by switching off
the appliance using the ON/ OFF button (17).
23