User manual

Bottles cycle
o Place the bottles into the blast chiller as shown in the diagram
below:
o Close the door and press the bottles cycle button (5) repeatedly
until the relevant time icon is selected. For food class icon details
please see the table below.
Icon 10 10 minutes
Icon 11 20 minutes
Icon 12 30 minutes
o Approximately five seconds after selecting the desired time, the
cycle will start automatically.
o The display will show the time cycle icon (13) and the bottles
cycle icon (14) which indicates the chosen cycle has started
correctly.
o At the end of the cycle, the progression icons (10, 11 and 12)
will flash together with a buzzer which will sound for
approximately twenty seconds. To end the cycle, open the door.
o At the end of the cycle, the chill blaster will switch into
maintenance mode until the door is opened. The bottles will
remain in a thermal range of 8°C - 12 °C.
o It is possible to interrupt the cycle at any time by switching the
appliance off using the ON / OFF button (17).
22