User manual

16
aking drinks M
Connecting the filter ho
sure that it is in the position shown in the drawing
f the holder anti-clockwise, making sure that it
dle
clockwise and remove it from the filter holder ring nut (19).
acuum
eing created during the espresso making process.
allow excess coffee to
pill out
filter for 1 French coffee pod (6)
re that the coffee pods are used prior
lder to the main boiler
o Lift the filter holder (1) towards the filter holder ring nut (19);
making
above.
o Continue lifting the holder until it locates inside of the ring nut.
o Turn the handle o
is fully secured.
o When you have finished using the holder, turn the han
IMPORTANT: If the filter gets attached to the boiler, you
should carefully remove it. This is a result of a v
b
Making a drink using coffee pods
Coffee pods are an easy, practical and hygienic way to make coffee.
The packaging used for coffee pods does not
s and can be easily removed after use.
o IMPORTANT: If you are using Italian coffee
pods, then the filter for 1 Italian coffee pod (4)
must be used. If you are using French coffee
pods, then the
must be used.
o For best results ensu
to their use by date.
o Follow the instructions on filling the water reservoir (pages 11 –
14) and “Dispensing hot water through the main boiler” (page
15).