User manual

12
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
you can select a cooking function or set a temperature, you
must set the appliance into manual operation mode.
o To select manual operation mode, press the manual operation
button (13) on the control panel.
Setting the time of day
After setting your oven for manual operation, you should also
set the time of day.
o After releasing the manual operation button, use the minus
button (14) and plus button (15) to adjust the time that
appears in the display. After getting the display to the correct
time, release the minus and plus buttons. After five seconds the
time will fix in the display and you will be able to use your oven.
o The “manual operation” symbol (17) will light on the oven
programmer/timer display.
Before first use
o To remove any residue from the main oven that may have been
left from the manufacturing process, you should select the fan
oven function and turn the thermostat dial to its maximum
temperature setting. For the secondary oven you should select
the conventional oven function and select its maximum
temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave each oven on maximum setting for 30 – 40
minutes.
o IMPORTANT: You should not burn off both ovens
simultaneously.